Refer this link if you want a video guide
https://www.youtube.com/watch?v=FU6Pul1g234
Things required:
1. Flashtool driver pack for all xperia devices (Tick all the available xperia devices even if your device is not listed)
2. flashtool v0.9.11.0-windows
3.Xperia L Stock rom (.tft file)
for other devices you may search it on google
Steps:
1. Install the flashtool driver pack.
2. Install the flashtool software.
3. Unzip the stock rom and place the ".tft" file in the C:\Flashtool\firmwares
4. Open the flashtool and click on the thunder button besides the BLU
(DO NOT CLICK ON THE BLU it is used to unlock the bootloader)
5. In the bootmode chooser select the flashmode and click OK
(It will list the available firmwares placed in the firmware folder)
6.Select the one you want to flash (Ensure that in wipe section Data and Cache are ticked)
and click on Flash button
(Wait for a while as the software prepares the files and will prompt to connect the device)
(Switch off the phone if it is not bricked)
7. Hold the Vol down key and attach the USB cable. Release it after the flashing gets started.
(Don't panic if its not getting detected try again as the PC initializes the drivers first time you connect phone in flashmode, still if its not getting detected install adb drives and flashboot drivers mentioned below)
Additional drivers: (Download and install these only if the device is not detected by flashtool)
1. adb drivers
2. fastboot drivers
Wait for the flash process and DO NOT interrupt the USB cable it may render your phone useless.
After it completes remove the USB cable and Power on the phone
Be patient, the first boot may take much time.
Restart your phone once after the first boot.
Things required:
1. Flashtool driver pack for all xperia devices (Tick all the available xperia devices even if your device is not listed)
2. flashtool v0.9.11.0-windows
3.Xperia L Stock rom (.tft file)
for other devices you may search it on google
Steps:
1. Install the flashtool driver pack.
2. Install the flashtool software.
3. Unzip the stock rom and place the ".tft" file in the C:\Flashtool\firmwares
4. Open the flashtool and click on the thunder button besides the BLU
(DO NOT CLICK ON THE BLU it is used to unlock the bootloader)
5. In the bootmode chooser select the flashmode and click OK
(It will list the available firmwares placed in the firmware folder)
6.Select the one you want to flash (Ensure that in wipe section Data and Cache are ticked)
and click on Flash button
(Wait for a while as the software prepares the files and will prompt to connect the device)
(Switch off the phone if it is not bricked)
7. Hold the Vol down key and attach the USB cable. Release it after the flashing gets started.
(Don't panic if its not getting detected try again as the PC initializes the drivers first time you connect phone in flashmode, still if its not getting detected install adb drives and flashboot drivers mentioned below)
Additional drivers: (Download and install these only if the device is not detected by flashtool)
1. adb drivers
2. fastboot drivers
Wait for the flash process and DO NOT interrupt the USB cable it may render your phone useless.
After it completes remove the USB cable and Power on the phone
Be patient, the first boot may take much time.
Restart your phone once after the first boot.
No comments:
Post a Comment